From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Jul 29 2004 - 14:23:33 GMT-3
Tim,
MUX, unlike SNAP, is a single protocol encapsulation. What this
means is that if you are running VoATM (direct encap at layer 2) you
cannot run IP or IPX on the same VC.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> ccie2be
> Sent: Thursday, July 29, 2004 12:17 PM
> To: Group Study
> Subject: Voice over ATM
>
> Hi guys,
>
> This is an example config of voice over ATM:
>
>
>
> interface ATM3/0
>
> pvc 0/101
>
> ubr 1000
>
> encapsulation aal5mux voice
>
> !
>
> dial-peer voice 1 voatm
>
> destination-pattern 8871010
>
> session target ATM3/0 pvc 0/101
>
>
>
>
>
> Here's my question:
>
>
>
> If I'm configuring voip, do I still need the "voice" parameter in the
>
>
>
> "encapsulation aal5mux voice" command above?
>
>
>
> Can someone explain what the voice option actually does?
>
>
>
> TIA, Tim
>
>
This archive was generated by hypermail 2.1.4 : Sun Aug 01 2004 - 10:12:06 GMT-3