From: W Walla (wallafly@hotmail.com)
Date: Thu Sep 16 2004 - 12:52:23 GMT-3
/Hello good people-
I have a question on how this hub and spoke is configured. I have a full T1
on both side but the HUB shows timeslots 1-24 and the spoke side doesn't
have that sommand. How is this affecting performance, what should be done
to take advantage of the Full T1 between the two. Also, the HUB has other
spokes it shares with the "spoke" in question they are all 256k with
timeslots 1-4 command.. Thanks!
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:45 GMT-3