From: wei zhu (zhuwei1231@yahoo.ca)
Date: Fri Sep 17 2004 - 10:18:02 GMT-3
interface loopback0
ip address 10.0.0.1 255.255.255.255
ip policy route-map VoIP_PBR
ip route-cache policy
!
ip local policy route-map VoIP_PBR
without PBR on loopback doesn't work, check the link.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/vvfax_c/vclcef.htm#75912
Wei
--- gladston@br.ibm.com wrote:
> Thanks Wei,
>
> My copy/paste was wrong. I mean: without the command
> "ip policy route-map
> VoIP_PBR" under loopback, does it work? (just with
> the global command "ip
> local policy route-map VoIP_PBR". Or with just the
> command under loopback
> and without the global command.
>
> I did not understand if and why it need both?
>
> Cordially,
>
------------------------------------------------------------------
> Alaerte Gladston Vidali
> IBM Global Services - SO
> Tel.55+11+2121-2879 Fax:55+11+2121-2449
>
>
>
>
> "Wei Zhu" <zhuwei1231@yahoo.ca>
> 16/09/2004 20:39
> Please respond to
> "Wei Zhu"
>
>
> To
> Alaerte Gladston Vidali/Brazil/IBM@IBMBR,
> <ccielab@groupstudy.com>
> cc
>
> Subject
> Re: RE: policy routing local generated voice
> traffic? problem solved!
>
>
>
>
>
>
> It doesn't work.
> As voice data is generated from Lo0, use the policy
> route on Lo0 works.
> Not sure why the DOC requires ip cef, it worked
> without, maybe just for
> fast
> switching of voice data.
>
> Thanks
> Wei
> ----- Original Message -----
> From: <gladston@br.ibm.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, September 16, 2004 1:30 PM
> Subject: Re: RE: policy routing local generated
> voice traffic? problem
> solved!
>
>
> > Hi Wei,
> >
> > If you just use "ip route-cache policy" under the
> loopback0, does it
> work?
> > (without "ip local policy route-map")
> >
> > ====================
> > interface loopback0
> > ip address 10.0.0.1 255.255.255.255
> > ip policy route-map VoIP_PBR
> > ip route-cache policy
> > !
> > ip local policy route-map VoIP_PBR
> > ====================
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:45 GMT-3