From: Sam Joseph (samjoseph747@hotmail.com)
Date: Mon Sep 20 2004 - 10:56:37 GMT-3
try using dialer pool member command .
Thanks,
Sam.
>From: "Andy Mrozek" <AndyMrozek@yahoo.com>
>Reply-To: "Andy Mrozek" <AndyMrozek@yahoo.com>
>To: <ccielab@groupstudy.com>
>Subject: ISDN logical interace config methods
>Date: Sun, 19 Sep 2004 21:04:32 -0700
>
>I have read and seen config samples of using virtual-templates with bri's
>or
>other method of configuring ppp and other logical information on interfaces
>other than BRI..... and know about the following:
>
>1- dialer profiles
>2- rotary groups
>3- heard of virtual-templates but havent been able to get them to
>work........
>
>Has anyone configured something similar to this ... or know if this config
>example should work..... I have tried on my home vconsole 4 port sim with
>no
>avail.... looks like interesting traffic isnt bound between logical dialer
>interface and physical bri.. as when I debug dialer events or packets.....
>I
>see packets such as ping going through but debug states they are
>unintersting.....
>
>R1:
>
>interface bri0/0
> ip address 1.1.1.2 255.255.255.0
> isdn switch-type basic-ni
> isdn spid1 11112
> isdn spid2 11113
> dialer string 2222
> encap ppp
> dialer-group 1
> dialer rotary-group 10
>
>
>interface dialer 10
> ip unnumbered bri0/0
> encap ppp
> ppp multilink
> dialer load-threshold 51
>
>
>dialer-list 1 protocol ip permit
>
>
>
>R2:
>
>interface bri0
> ip address 1.1.1.1 255.255.255.0
> isdn switch-type basic-ni
> isdn spid1 22221
> isdn spid2 22222
> dialer string 1111
> encap ppp
> dialer-group 1
> dialer rotary-group 10
>
>interface dialer 10
> ip unnumbered bri0/0
> encap ppp
> ppp multilink
> dialer load-threshold 51
>
>dialer-list 1 protocol ip permit
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:46 GMT-3