From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Mon Sep 20 2004 - 12:05:12 GMT-3
Don't you need a dialer-group for the interesting traffic ?
-----Message d'origine-----
De : gladston@br.ibm.com [mailto:gladston@br.ibm.com]
Envoyi : Monday, September 20, 2004 4:59 PM
@ : ccielab@groupstudy.com
Objet : Re: RE: ATM Back to Back for SVC's
=======
quoted
** PVC - Dialer Profiles **
int atm2/0
no ip address
pvc 1/44
encap aal5snap
protocol ppp dialer
dialer pool-member 1
interface dialer1
ip address 10.1.1.1 255.255.255.0
encap ppp
dialer pool 1
=======
Joe,
Have you tested these configuration. I tried it but it is not working.
Version is 12.2(23)
ATM#sh run
interface ATM0
pvc 0/108
protocol ppp dialer
dialer pool-member 8
!
interface Dialer8
ip address 172.16.108.10 255.255.255.0
encapsulation ppp
dialer pool 8
R8#sh run
interface ATM6/0/0
pvc 0/108
protocol ppp dialer
dialer pool-member 8
!
!
interface Dialer8
ip address 172.16.108.8 255.255.255.0
encapsulation ppp
dialer pool 8
swr1#sh atm vc
VCD / Peak Avg/Min Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps Cells
Sts
6/0/0 2 0 5 PVC SAAL UBR 155000
UP
6/0/0 1 0 16 PVC ILMI UBR 155000
UP
6/0/0 4 0 108 PVC SNAP UBR 155000
UP
swr1#p 172.16.108.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.108.10, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
I already tested it without using the PPP configuration, just to check the
ATM switch stuff, and it is working fine.
Do you have an URL that explain these configurations?
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:46 GMT-3