From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Sep 21 2004 - 01:13:24 GMT-3
Jonathan,
The command is the "atm pvc" interface command. Unlike a Frame
Relay switch, the LS1010 does not need a statement on both interfaces.
LS1010:
interface ATM0/0/0
description ATM to Rack1R6 ATM 0/0/0
!
interface ATM1/0/3
description ATM to BB1 ATM 0/0
atm pvc 0 101 interface ATM0/0/0 0 101
Rack1R6:
interface ATM0/0/0
ip address 54.1.1.6 255.255.255.0
pvc 0/101
protocol ip 54.1.1.254 broadcast
BB1:
interface ATM0/0
ip address 54.1.1.254 255.255.255.0
pvc 0/101
protocol ip 54.1.1.6 broadcast
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jonathan R. Charles
Sent: Monday, September 20, 2004 8:26 PM
To: ccielab@groupstudy.com
Subject: Sample LS1010 config
I got assigned a rack of equipment, and it looks like no pvcs are built
on
the LS1010, does anyone have a good sample config on how you do the
equivalent of the frame-relay route commands for ATM?
Thanx
Jonathan
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:46 GMT-3