From: John Matus (jmatus@pacbell.net)
Date: Sat Sep 25 2004 - 01:12:53 GMT-3
i believe that you would redistribute bgp into the igp and then igp back
into bgp along the path...
the i think at the last hop you need to issue the 'redis local-as' command,
but i could be wrong.
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Joseph D. Phillips" <josephdphillips@fastmail.us>
To: <ccielab@groupstudy.com>
Sent: Friday, September 24, 2004 8:36 PM
Subject: Routing BGP routes thorugh non-BGP speaking router
>I am doing a very difficult exercise, thanks to my good pal Scott Morris,
>who is probably laughing himself silly at this moment.
>
> I have a problem in that I need to get an aggregate route from one
> autonomous system to another, joined together in two places.
>
> One path between the two speakers is through a contiguous BGP AS.
>
> The other path happens to include a non-BGP speaking router.
>
> What are my options, short of forcing the non-BGP router to speak BGP?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:49 GMT-3