From: Bhavin Patel (BPatel@ibasis.net)
Date: Wed Sep 29 2004 - 12:50:51 GMT-3
Hi Alex,
What is the signaling channel (DS0 number) you are using on this E1?
Depending, on how your configuration is, you can try to block the channel 31
using foll. command
isdn service dsl <dsl_number> b_chan 31 state 2
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/dial
_r/dia_i2g.htm#wp1183668
Regards,
Bhavin
-----Original Message-----
From: Alex Hsieh [mailto:ccie21@hotmail.com]
Sent: Wednesday, September 29, 2004 10:27 AM
To: ccielab@groupstudy.com
Subject: isdn channel problem
hi folks:
Currently I have router connected to PBX using E1 PRI.How do I config
router such that
incoming voice calls from remote site to select b-channel that's
functional.Router seems to
keep trying sending calls to faulty channel(31) thus calls can't be
completed.Thanks for help.
This archive was generated by hypermail 2.1.4 : Fri Oct 01 2004 - 15:00:51 GMT-3