Re: Cat 3550 - Failing

From: Matt (matt_ccie_2004@yahoo.com)
Date: Sun Oct 03 2004 - 16:55:41 GMT-3

Unfortunately I don't think there is a fix aside from
RMA. Here's a link with more info:

http://www.cisco.com/en/US/customer/products/hw/switches/ps646/products_installation_guide_chapter09186a008011b582.html#xtocid1

-Matt

--- Todd Carswell <acarswell@nc.rr.com> wrote:

> All,
>
> Having a problem w/ a 3550. It's failing POST in
> the loopback test. Any
> ideas on how to fix?
>
> Boot process below...
>
>
>
> Initializing Flash...
> flashfs[0]: 81 files, 4 directories
> flashfs[0]: 0 orphaned files, 0 orphaned directories
> flashfs[0]: Total bytes: 15998976
> flashfs[0]: Bytes used: 7159808
> flashfs[0]: Bytes available: 8839168
> flashfs[0]: flashfs fsck took 18 seconds.
> ...done Initializing Flash.
> Boot Sector Filesystem (bs:) installed, fsid: 3
> Loading
>
"flash:c3550-i5q3l2-mz.121-19.EA1/c3550-i5q3l2-mz.121-19.EA1.bin"...#####################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
>
> File
>
"flash:c3550-i5q3l2-mz.121-19.EA1/c3550-i5q3l2-mz.121-19.EA1.bin"
>
> uncompressed and installed, entry point: 0x3000
> executing...
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and
> Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version
> 12.1(19)EA1, RELEASE
> SOFTWARE (fc2)
> Copyright (c) 1986-2003 by cisco Systems, Inc.
> Compiled Thu 23-Oct-03 21:44 by yenanh
> Image text-base: 0x00003000, data-base: 0x0080A8B0
>
>
> Initializing flashfs...
> flashfs[1]: 81 files, 4 directories
> flashfs[1]: 0 orphaned files, 0 orphaned directories
> flashfs[1]: Total bytes: 15998976
> flashfs[1]: Bytes used: 7159808
> flashfs[1]: Bytes available: 8839168
> flashfs[1]: flashfs fsck took 8 seconds.
> flashfs[1]: Initialization complete.
> ...done Initializing flashfs.
> POST: CPU Buffer Tests : Begin
> POST: CPU Buffer Tests : End, Status Passed
> POST: CPU Interface Tests : Begin
> POST: CPU Interface Tests : End, Status Passed
> POST: Switch Core Tests : Begin
> POST: Switch Core Tests : End, Status Passed
> POST: CPU Interface 2nd Stage Tests : Begin
> POST: CPU Interface 2nd Stage Tests : End, Status
> Passed
> POST: CAM Subsystem Tests : Begin
> POST: CAM Subsystem Tests : End, Status Passed
> POST: Ethernet Controller Tests : Begin
> POST: Ethernet Controller Tests : End, Status Passed
> POST: Loopback Tests : Begin
> looped-back packet not received on controller 1,
> channel 1
> looped-back packet not received on controller 1,
> channel 2
> looped-back packet not received on controller 1,
> channel 3
> looped-back packet not received on controller 1,
> channel 4
> looped-back packet not received on controller 1,
> channel 5
> looped-back packet not received on controller 1,
> channel 6
> looped-back packet not received on controller 1,
> channel 8
> looped-back packet not received on controller 1,
> channel 9
> looped-back packet not received on controller 1,
> channel 10
> looped-back packet not received on controller 1,
> channel 11
> looped-back packet not received on controller 1,
> channel 12
> looped-back packet not received on controller 2,
> channel 4
> looped-back packet not received on controller 2,
> channel 9
> looped-back packet not received on controller 2,
> channel 10
> looped-back packet not received on controller 2,
> channel 11
> looped-back packet not received on controller 2,
> channel 12
> looped-back packet not received on controller 3,
> channel 1
> looped-back packet not received on controller 4,
> channel 1
> POST: Loopback Tests : End, Status Passed
>
> cisco WS-C3550-24 (PowerPC) processor (revision D0)
> with 65526K/8192K bytes
> of memory.
> Processor board ID CHK0626W0MT
> Last reset from warm-reset
> Bridging software.
> Running Layer2/3 Switching Image
>
> Ethernet-controller 1 has 12 Fast Ethernet/IEEE
> 802.3 interfaces
> FastEthernet0/1 failed POST
> FastEthernet0/2 failed POST
> FastEthernet0/3 failed POST
> FastEthernet0/4 failed POST
> FastEthernet0/5 failed POST
> FastEthernet0/6 failed POST
> FastEthernet0/7 failed POST
> FastEthernet0/8 failed POST
> FastEthernet0/9 failed POST
> FastEthernet0/10 failed POST
> FastEthernet0/11 failed POST
> FastEthernet0/12 failed POST
>
> Ethernet-controller 2 has 12 Fast Ethernet/IEEE
> 802.3 interfaces
> FastEthernet0/17 failed POST
> FastEthernet0/18 failed POST
> FastEthernet0/19 failed POST
> FastEthernet0/20 failed POST
> FastEthernet0/21 failed POST
> FastEthernet0/22 failed POST
> FastEthernet0/23 failed POST
> FastEthernet0/24 failed POST
> FastEthernet0/13 failed POST
> FastEthernet0/14 failed POST
> FastEthernet0/15 failed POST
> FastEthernet0/16 failed POST
>
> Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE
> 802.3 interface
> GigabitEthernet0/1 failed POST
>
> Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE
> 802.3 interface
> GigabitEthernet0/2 failed POST
>
> 24 FastEthernet/IEEE 802.3 interface(s)
> 2 Gigabit Ethernet/IEEE 802.3 interface(s)
>
> The password-recovery mechanism is enabled.
> 384K bytes of flash-simulated non-volatile
> configuration memory.
> Base ethernet MAC Address: 00:09:B7:C5:DB:80
> Motherboard assembly number: 73-5700-08
> Power supply part number: 34-0966-02
> Motherboard serial number: CAT061907UV
> Power supply serial number: DAB06230EWR
> Model revision number: D0
> Motherboard revision number: C0
> Model number: WS-C3550-24-SMI
> System serial number: CHK0626W0MT
>
>
> Press RETURN to get started!
>
> cat3550-1(config)#int fa0/1
> cat3550-1(config-if)#no shut
> Fa0/1 can't be brought up because it failed POST in
> loopback test
> cat3550-1(config-if)#^Z
> cat3550-1#
>
>

This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:42 GMT-3