From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Oct 13 2004 - 10:48:06 GMT-3
The dialer interface is in backup, not the BRI interface. What
specifically don't you understand about the section?
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Cisco Net
> Sent: Wednesday, October 13, 2004 1:23 AM
> To: ccielab@groupstudy.com
> Subject: IE Lab 9 ISDN 4.13
>
> I am not able to understand this second dialer interface concept.
> Especialy since the main BRI interface is standby mode (back up) to
> the fraimrelay interface.
>
> Even if the interesting traffic (ICMP) hit on the new dialer
> interface, how does the call will open when the bri interface is on
> standby...
>
> Please help me with this...
>
> By the way my new dialer interface is not getting activated when i
> ping the ip address on the other side (section 4.13)
> R4:
> interface Dialer100 --------------> Second interface for 4.13 secton
> ip address 10.45.45.4 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer remote-name Rack1R5
> dialer string 4370443
> dialer-group 10
> ppp authentication pap
> ppp chap refuse
>
> interface BRI3/0
> no ip address
> encapsulation ppp
> load-interval 30
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 4082436155
> ppp authentication chap pap
> ppp pap sent-username Rack1R4 password 0 CISCO
> ppp multilink
>
> access-list 111 permit icmp host 10.45.45.4 host 10.45.45.5
> dialer-list 10 protocol ip list 111
>
> R5:
>
> interface Dialer100 -------------> Second interface for 4.13 secton
> ip address 10.45.45.5 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer remote-name Rack1R4
> dialer-group 11
> ppp authentication pap
> ppp chap refuse
>
> interface BRI2/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 4084370443
> ppp authentication chap pap
> ppp pap sent-username Rack1R4 password 0 CISCO
> ppp multilink
>
> access-list 111 permit icmp host 10.45.45.5 host 10.45.45.4
> dialer-list 10 protocol ip list 111
> Thank you
> Cert.
>
>
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:47 GMT-3