From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Oct 19 2004 - 10:25:59 GMT-3
Hey guys,
I was just configuring GTS using MQC on a serial link when I got this error
message:
Rack1R1(config-pmap-c)#priority 128000 8000
Minimum burst that can supported is 64000
Note that the 2nd parameter, 8000, is in bytes/sec. I don't know if the 64000
is in bits/sec or bytes/sec, but in either case, the IOS seems to be telling
me something is wrong.
Is anything really wrong? (Besides the IOS error message?)
Or is this because of the IOS running on this router?
Rack1R1(config-pmap-c)#do show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.2(15)T7, RELEASE SOFTWARE
(f
c2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 09-Aug-03 07:18 by ccai
Image text-base: 0x80008098, data-base: 0x8195144C
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Rack1R1 uptime is 1 day, 9 hours, 44 minutes
System returned to ROM by power-on
System image file is "flash:c2600-j1s3-mz.122-15.T7.bin"
Thanks, Tim
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:49 GMT-3