From: ccie2be (ccie2be@nyc.rr.com)
Date: Tue Oct 19 2004 - 20:36:23 GMT-3
Hey Matt,
I can't test this anymore since I've moved on to a new lab and topology.
But, what I just realized is that I wasn't exchanging routes with the router
I was learning routes from. Therefore, since I was using a source address
of 150.3.6.6 instead of the interface address, the rtr pings timed out while
the normal pings went through fine.
Thanks for giving me the idea that helped me figure this out.
Tim
----- Original Message -----
From: "Matt M" <mmaslo@optonline.net>
To: "ccie2be" <ccie2be@nyc.rr.com>; "Group Study" <ccielab@groupstudy.com>
Sent: Tuesday, October 19, 2004 7:05 PM
Subject: Re: rtr or SAA
> It looks like your pings are timing out.....did u try extended ping with
> 150.3.6.6 as your source address?
>
>
> ----- Original Message -----
> From: "ccie2be" <ccie2be@nyc.rr.com>
> To: "Group Study" <ccielab@groupstudy.com>
> Sent: Tuesday, October 19, 2004 11:39 AM
> Subject: rtr or SAA
>
>
> > Hi guys,
> >
> > I've config'd rtr on R6 to ping 115.0.0.1 every 30 seconds. As you can
see
> > from the output below pings are successful and they take a max of 4ms.
> >
> > However, in the output of the show rtr collections stats, there are no
> > successful "operations". Why is that?
> >
> > Rack1R6#p 115.0.0.1
> >
> > Type escape sequence to abort.
> > Sending 5, 100-byte ICMP Echos to 115.0.0.1, timeout is 2 seconds:
> > !!!!!
> > Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
> > Rack1R6#sh rtr collection-statistics
> > Entry number: 1
> > Start Time Index: *11:35:07.228 UTC Tue Oct 19 2004
> > Number of successful operations: 0
> > Number of operations over threshold: 0
> > Number of failed operations due to a Disconnect: 0
> > Number of failed operations due to a Timeout: 10
> > Number of failed operations due to a Busy: 0
> > Number of failed operations due to a No Connection: 0
> > Number of failed operations due to an Internal Error: 0
> > Number of failed operations due to a Sequence Error: 0
> > Number of failed operations due to a Verify Error: 0
> > RTT Values:
> > RTTAvg: 0 RTTMin: 0 RTTMax: 0
> > NumOfRTT: 0 RTTSum: 0 RTTSum2: 0
> >
> > HEre's the rtr config:
> >
> > rtr 1
> > type echo protocol ipIcmpEcho 115.0.0.1 source-ipaddr 150.3.6.6
> > request-data-size 1250
> > timeout 25
> > frequency 30
> > rtr schedule 1 start-time now
> >
> > Am I missing something very basic?
> >
> > Thanks, Tim
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:50 GMT-3