From: John Matus (jmatus@pacbell.net)
Date: Thu Oct 28 2004 - 14:28:25 GMT-3
in what situation would you have to change the fair queue defaults, i.e. -
"fair-queue X Y Z''
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Brian McGahan" <bmcgahan@internetworkexpert.com>
To: "John Matus" <jmatus@pacbell.net>; "lab" <ccielab@groupstudy.com>
Sent: Thursday, October 28, 2004 10:07 AM
Subject: RE: fair-queue defaults
> No. To enable WFQ simply issue the interface level command
> "fair-queue". To disable it and run FIFO, issue "no fair-queue". "show
> queue [interface]" will show the WFQ configuration:
>
> R1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> R1(config)#int e0/0
> R1(config-if)#fair-queue
> R1(config-if)#do show queue e0/0
> Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/1000/64/0 (size/max total/threshold/drops)
> Conversations 0/0/256 (active/max active/max total)
> Reserved Conversations 0/0 (allocated/max allocated)
> Available Bandwidth 7500 kilobits/sec
>
> R1(config-if)#no fair-queue
> R1(config-if)#do show queue e0/0
> 'Show queue' not supported with FIFO queueing.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
>> John Matus
>> Sent: Thursday, October 28, 2004 11:59 AM
>> To: lab
>> Subject: fair-queue defaults
>>
>> hi all,
>> to start a new thread on fair-queue,
>> there are certain circumstances where you must enable fair-queue, for
>> wred,
>> for rtp if i remember correctly <correct me if i'm wrong>. but
> someone
>> was
>> telling me the other day that by default fair-queue has zero queues
>> configured
>> and that you must specify queues in order for it to function <i think
> that
>> is
>> the third variable under fair-queue, the first being
>> congestive-discard-thresh> is there any credence to this?
>>
>>
>> Regards,
>>
>> John D. Matus
>> MCSE, CCNP
>> Office: 818-782-2061
>> Cell: 818-430-8372
>> jmatus@pacbell.net
>>
>>
> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Nov 06 2004 - 17:11:54 GMT-3