From: Jensen, Brian D. (bdjensen@eschelon.com)
Date: Sat Nov 13 2004 - 15:08:47 GMT-3
Hi Mike,
You will need to delete vlan.dat from the flash. That will wipe out any
previous vlan vtp configs.
HTH.
Brian
> -----Original Message-----
> From: nobody@groupstudy.com [SMTP:nobody@groupstudy.com] On Behalf Of Mike
> Flanagan
> Sent: Saturday, November 13, 2004 10:49 AM
> To: Ccielab
> Subject: Deleting Vlan and VTP info
>
> Hello,
>
> I have noticed on my lab that when I delete the config and reload, then
> try
> and configure VTP info that the previouse VTP domain is still configured.
> Is
> there a way to wipe this information out before I move on to another lab
> scinario ?
>
> Thanks,
>
> Mike F.
>
>
> Rack1SW1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> Rack1SW1(config)#vt
> Rack1SW1(config)#vtp doma
> Rack1SW1(config)#vtp domain CCIE
> Changing VTP domain name from INTEXP to CCIE
> Rack1SW1(config)#
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:43 GMT-3