From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Mon Nov 29 2004 - 06:40:30 GMT-3
I believe the below config found here
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_white_paper0900aecd
8017530d.shtml
<http://www.cisco.com/en/US/tech/tk648/tk362/technologies_white_paper0900aec
d8017530d.shtml>
Is for generating traffic.
fastethernet 0/0
wp9000235add icmp
wp9000236l3-src-addr 10.0.227.2
wp9000237l3-dest-addr 10.0.210.5
wp9000238l2-src-addr 0004.9b85.3400
wp9000239l2-dest-addr 0050.7327.3000
wp9000240rate 1750
wp9000241data-length 10
wp9000243start
Anyone knows where it is documented ?
Thanks
-- Richard
**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:50 GMT-3