Re: ospf/eigrp D.EX ROUTE

From: Joe Chang (changjoe@earthlink.net)
Date: Sun Dec 12 2004 - 15:02:23 GMT-3

I think you are using the right command for what you are trying to do, but you are using the command incorrectly:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp_r/ind_r/1rfindp1.htm#wp1017503

----- Original Message -----
From: "mani poopal" <mani_ccie@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, December 11, 2004 12:02 AM
Subject: ospf/eigrp D.EX ROUTE

> Hi group,
>
> I have a small question. I am mutually redistributing eigrp and ospf in two different places(R5 and R4). In the hub eigrp router, I am seeing all ospf routes with D-EX from two redistributed routers. How can I make this eigrp router to prefer ospf routes only from one router say R5. I tried following command, but it did not work.
> (config-router)#distance 169 5.5.5.5 0.0.0.0 <--I used router ID of R5
> or
> (config-router)#distance 169 111.10.1.5 0.0.0.0<--I used neighbor ip of R5
>
> any help is appreciated
>
> thanks
>
> Mani
>
>
>
> B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
> (416)431 9929
> MANI_CCIE@YAHOO.COM
>
> ---------------------------------
> Do you Yahoo!?
> Read only the mail you want - Yahoo! Mail SpamGuard.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:26 GMT-3