From: ccie@rivancitadel.com
Date: Wed Jan 26 2005 - 13:27:09 GMT-3
Hello,
To clarify a little. You couldn't use the FO licensed PIX in a
production environment. It will process a certain amount of data then lock
up. You can use it in a Lab environment. You will just need to reboot power
cycle the PIX from time to time. That is what I have done with one in my
lab. Hope this helps.
Russ.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Kevin Minihane
Sent: Wednesday, January 26, 2005 11:16 AM
To: 'Tom Young'
Cc: ccielab@groupstudy.com
Subject: RE: PIX with failover license
Hi
I ran into the same problem just last week. No, you cant (according to
Cisco) run a PIX using only a failover licence. I managed to upgrade my
licence to restricted software licence, and now everything is working fine.
This drove me nuts for a few weeks, until I got it sorted. My vendor
shipped me the wrong licence, soI was in limbo for a while.
Anyway, again, to answer your question, (and to repeat what a local Cisco
engineer told me), you can't use the failoer licence on it's own
Cheers
Kevin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tom
Young
Sent: 26 January 2005 14:57
To: ccielab@groupstudy.com
Subject: PIX with failover license
hi, group
May I use a pix with FO license as a single firewall not for the failover
constrction.
Could it do all the basic functions as a normal firewall?
thanks
__________________________________
Let's Celebrate Together!
Yahoo! JAPAN
http://pr.mail.yahoo.co.jp/so2005/
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3