From: Radu Pavaloiu (Radu.Pavaloiu@connex.ro)
Date: Thu Jan 27 2005 - 12:50:12 GMT-3
If you are using HDCL "dialer map protocol" is a must on the called
party, if you are using ppp encap is not mandatory ( dynamic map is
working with ppp ). You need dialer-group on each site to define
intersting traffic and be sure that line do not goes down regardless of
site. ( or you can put dialer idle-timeout 0 on the called party ).
I die. I fracture into thousands of fragments of flushed embarrassment.
My body parts fly, connectionless, over a badly constructed spanning
tree that isn't quite loop free.
I fall screaming into 127.0.0.1.
Radu
CCNP, CCDP, MCSE
#+40 213022658
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jonathan ZD
Sent: Thursday, January 27, 2005 5:34 PM
To: CCIE - GS
Subject: ISDN - Dialer Map IP
Hello GS,
I need the clearification for ISDN configuration:
On the called side (router that receive the call) that will not make any
call to any other peers, do the commands "dialer map ip" and
"dialer-group" are needed on the bri-int configuration?
Thanks,
Jone
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:26 GMT-3