Re: ppp over f/r

From: mani poopal (mani_ccie@yahoo.com)
Date: Wed Feb 02 2005 - 21:45:49 GMT-3

• Next message: John T M: "Re: RSH and RCMD"
• Previous message: John T M: "Re: CCIE #14388"
• Maybe in reply to: ccie2be: "ppp over f/r"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks Tim, I will have a look, One more question, I raised earler, to enable snmp to send trap(related to vtp) to specific server with password abc, is the follwoing command is enough or you need snmp-server enable traps vtp as well
 
snmp-server host 1.1.1.100 traps XXX vty (do we need snmp-server enable trap commad too)
 
thanks
 
Mani

ccie2be <ccie2be@nyc.rr.com> wrote:
The task didn't allow that. I think the point of the task was to show that p2p sub aren't needed toaccomplish this taks.
 
See IE lab 18, task 2.1 - 2.4
 
 
----- Original Message -----
From: mani poopal
To: ccie2be ; Group Study
Sent: Wednesday, February 02, 2005 7:34 PM
Subject: Re: ppp over f/r

Hi Tim,
 
Since you are using different ip's for virtual teplates, why did'nt you create two point to point subinterfaces and assigned virtual templeates to those two point to point interfaces;
eg:int s 0.1 point to point
              frame-relay interface-dlci xxx ppp virtual-template 1
    int s 0.2 poin to point
            frame-relay interface dlci yyy ppp virtual-template 2
 
thanks
Mani

ccie2be <ccie2be@nyc.rr.com> wrote:
Hi guys,

This is my config

interface Serial1/0
no ip address
encapsulation frame-relay
frame-relay interface-dlci 301 ppp Virtual-Template2
frame-relay interface-dlci 305 ppp Virtual-Template1

interface Virtual-Template1
ip address 156.1.35.3 255.255.255.0
!
interface Virtual-Template2
ip address 156.1.15.3 255.255.255.0

What I don't understand is why in the output below don't I see an ip address
for Virtual-Access1

but there's one for Virtual-Access3?

Also, why does it say "TFTP" under the Method column for the Virtual-Access2 &
3 interface?

Can anyone help me think like a router with this?

Interface IP-Address OK? Method Status
Protocol

Virtual-Access1 unassigned YES unset down
down

Virtual-Template1 156.1.35.3 YES manual down
down

Virtual-Access2 156.1.15.3 YES TFTP up
up

Virtual-Template2 156.1.15.3 YES manual down
down

Virtual-Access3 156.1.35.3 YES TFTP up
up

TIA, Tim

• Next message: John T M: "Re: RSH and RCMD"
• Previous message: John T M: "Re: CCIE #14388"
• Maybe in reply to: ccie2be: "ppp over f/r"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:16 GMT-3