Dialer map order not working

From: ccie2b@brugam.com
Date: Fri Feb 04 2005 - 14:01:10 GMT-3

• Next message: null void: "Re: Requirement details of "IP PIM NBMA""
• Previous message: Labcciee: "Re: Requirement details of "IP PIM NBMA""
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

All,

This is practically my first time sending on this list, but
I have a problem.

I have a router with one BRI interface that is trying to
dial to a router with 4 BRI interface.

When the first router dials, it dials to the 1st B channel
of the 1st BRI of the other router. If that B channel is
busy, it goes to the 2nd B channel. If the 2nd B channel is
busy it goes back to the 1st B channel that it already
tried.

The problem is that we have 8 B channels as we have 4 ISDN
to dial to. Have inputted the other numbers in the dialer
map statements, but it will not dial the other numbers on
the 2 numbers to the 1st ISDN's B channels.

I put the dialer order roundrobin command in and it makes
not difference. Anyone have any ideas?

• Next message: null void: "Re: Requirement details of "IP PIM NBMA""
• Previous message: Labcciee: "Re: Requirement details of "IP PIM NBMA""
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:17 GMT-3