IPv6 OSPF Support ?

From: ccie (ccie@gannons.net)
Date: Sun Feb 06 2005 - 14:59:26 GMT-3

Quick questions just trying to configure ipv6 ospf using
c2600-j1s3-mz.122-15.T14.bin.
I had a look at

http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6_c/sa_ospf3.htm#wp1114175

However the commands dont exist below are the nearest I can get. There
doesnt seem to be a way on
enabling the OSPF under the interface. I am sure its something simply
but its driving me nuts !

Rack1R5(config)#ipv unicast-routing
Rack1R5(config)#ipv6 router ospf 1
Rack1R5(config)#int f 0/0
Rack1R5(config-if)#ipv
Rack1R5(config-if)#ipv6 en
Rack1R5(config-if)#ipv6 enable
Rack1R5(config-if)#ipv
Rack1R5(config-if)#ipv6 os
Rack1R5(config-if)#ipv6 rou
Rack1R5(config-if)#ipv6 router ?

Thanks & Regards,
Kevin 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.5 - Release Date: 03/02/2005

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:17 GMT-3