From: ccie2be (ccie2be@nyc.rr.com)
Date: Thu Feb 10 2005 - 13:25:40 GMT-3
> Hi guys,
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6_
> c/sa_isis6.htm#wp1036755
>
>
> I'm confused with the usage of the area-name parameter in the example from
the
> above link.
>
> This example shows the area-name parameter in the summary steps used with
the
> router isis command, but in the detailed it doesn't use this parameter.
>
> However, in interface mode, it shows the area-name used with the ipv6
router
> isis command.
>
> The command reference doesn't offer much help either.
>
> 1) When do I need to use the area-name parameter with the router isis
> command?
>
> 2) Assuming this parameter is used with the interface command, ipv6
router
> isis, and has a value of AREA-1, where else in the config will this
parameter
> also need to be used? For example, will it have to be used on all other
> router interfaces connecting to this same link?
>
>
> TIA, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:18 GMT-3