Re: ATM aal5mux encapsulation Question

From: loc.pham@comcast.net
Date: Fri Feb 18 2005 - 02:31:41 GMT-3

• Next message: Balaji Siva: "Re: serial number"
• Previous message: B Kim: "ATM aal5mux encapsulation Question"
• Maybe in reply to: B Kim: "ATM aal5mux encapsulation Question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

  Hello B K,
  Default encap calling for snap = the ONLY inversed arp support.
  Therefore any other setting will need static setting.
   HTH,
   lP.

> Hi
>
> I set up the ATM PVC with dynamic mapping on both sides. Of course, it
> works fine.
>
> !
> interface ATM3/0/0
> ip address 10.1.1.1 255.255.255.0
> pvc 1/100
> broadcast
> !
>
> As soon as I configure the aal5mux encapsulation for IP on both sides
>
> !
> interface ATM3/0/0
> ip address 10.1.1.1 255.255.255.0
> pvc 1/100
> broadcast
> encapsulation aal5mux ip
> !
>
> Dynamic mapping disappears. And I had to configure the static mapping to
> get this work.
>
> Could anyone explain why aal5mux encapsulation doesn't work with dynamic
> mapping?
>
> Thank in advance.
> Beomsu Kim
> beokim@comcast.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Balaji Siva: "Re: serial number"
• Previous message: B Kim: "ATM aal5mux encapsulation Question"
• Maybe in reply to: B Kim: "ATM aal5mux encapsulation Question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:22 GMT-3