From: ccie2be (ccie2be@nyc.rr.com)
Date: Sat Feb 19 2005 - 10:46:03 GMT-3
Hi guys,
I'm running ospf and I noticed that in newer versions of IOS a new parameter
was added to the output
of the show ip os int command.
In the output below, what does the "oob-resync timeout" mean?
Serial0/0 is up, line protocol is up
Internet Address 149.1.254.4/24, Area 0
Process ID 1, Router ID 150.1.4.4, Network Type POINT_TO_MULTIPOINT, Cost:
64
Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT,
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:05
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 10
Last flood scan time is 0 msec, maximum is 4 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 150.1.5.5
Suppress hello for 0 neighbor(s)
Can anyone tell me how to interpret this oob-resync thing.
TIA, Tim
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:23 GMT-3