RE: snmp-server host command

From: ccie2be (ccie2be@nyc.rr.com)
Date: Fri Feb 25 2005 - 21:49:14 GMT-3

• Next message: chris kane: "Passed in RTP"
• Previous message: rodneyt@bigpond.net.au: "Re: OT: Detect a failure on an interface"
• Maybe in reply to: ccie2be: "snmp-server host command"
• Next in thread: mani poopal: "RE: snmp-server host command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Mani,

I'm glad you noticed that.

I had seen Kuldip's response and wasn't able to decide if I should anything.

Let me rephrase the question this way:

Will both A and B work or only A?

(A.) snmp-server enable traps

       snmp-server host 1.1.1.100 traps

(B.) snmp-server host 1.1.1.100 traps

___________________________________

This question comes from IE lab 20.

The Solution shows B but I can't test this and this is something that can
easily cost valuable points in the lab.

Personally, I believe A must be used because unless traps are enabled
globally I think no traps will be sent.

What do you think?

Thanks for your attention to detail.

Tim

  _____

From: mani poopal [mailto:mani_ccie@yahoo.com]
Sent: Friday, February 25, 2005 7:33 PM
To: kuldip singh; ccie2be
Cc: Group Study
Subject: Re: snmp-server host command

Hi Kuldip,

If I am right, Tim's question is ,

Do we have to configure

(A.)snmp-server enable traps

snmp-server host 1.1.1.100 traps vty

(B.)snmp-server host 1.1.1.100 traps vty-->Is it right or do we need to
enable traps globally

Mani

kuldip singh <dipa.singh@gmail.com> wrote:

Hi Tim,

The SNMP-SERVER HOST command specifies which hosts will receive SNMP
notifications, and whether you want the notifications sent as traps or
inform requests.

The SNMP-SERVER ENABLE TRAPS command globally enables the production
mechanism for the specified notification types (such as Border Gateway
Protocol [BGP] traps, config traps, entity traps, Hot Standby Router
Protocol [HSRP] traps, and so on).

On Thu, 24 Feb 2005 17:17:21 -0500, ccie2be wrote:
> Hi guys,
>
> Will traps be sent to a snmp server if only the
>
> snmp-server host [password]
>
> is configured and the snmp-server enable traps command isn't configured?
>
> I thought that the snmp-server enable traps command HAD TO BE configured
for
> any traps
>
> to be sent.
>
> Can anyone confirm this?
>
> TIA, Tim
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: chris kane: "Passed in RTP"
• Previous message: rodneyt@bigpond.net.au: "Re: OT: Detect a failure on an interface"
• Maybe in reply to: ccie2be: "snmp-server host command"
• Next in thread: mani poopal: "RE: snmp-server host command"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:25 GMT-3