PPP Multilink

From: gladston@br.ibm.com
Date: Wed Mar 09 2005 - 06:38:41 GMT-3

• Next message: farid khwaja: "Re: redundant network with shadow links"
• Previous message: David Fuller: "OT: CCIE's in Middle East"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This is from a Cisco doc:

================
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_example09186a00800943ad.shtml

quoted
 dialer load-threshold 80 outbound

!--- This set the load level for traffic at which additional connections
!--- will be added to the Multilink PPP bundle.
!--- Load level values range from 1 (unloaded) to 255 (fully loaded).
!--- The threshold in this case is 80/255 = 32%.

 dialer-group 1

!--- apply interesting traffic definition from dialer-list 1

 isdn switch-type basic-ni
 isdn spid1 51255522220101 5552222
 isdn spid2 51255522230101 5552223
 ppp authentication chap

!--- Use chap authentication.

 ppp multilink

!--- Use multilink to bring up both BRI channels.
=====================

But the practice dictates that just 'dialer load-threshold...' alone is enough to bring up both BRI channels. (and ppp multilink would be used to send traffic through both channel even if the first is not totally busy)

Any Advice?

• Next message: farid khwaja: "Re: redundant network with shadow links"
• Previous message: David Fuller: "OT: CCIE's in Middle East"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:43 GMT-3