From: Richard Gallagher (rgallagh@cisco.com)
Date: Thu Mar 10 2005 - 22:53:03 GMT-3
It's used in MPLS/VPN when RIP is being used for PE-CE routing protocol.
It allows the RIP metric to be copied from a BGP attribure back into RIP
from the remote site where the route originated. There do not seem to be
any reference on CCO to this though.
HTH, Rich
* Rich Gallagher
* CCIE #7211 - R&S, C&S
Dillon Yang wrote:
>Hi, Idris:
>
>Please show your IOS version and which protocol?
>Thanks.
>dillon
>
>----- Original Message -----
>From: "Idris, Hashiru Aminu" <hashng@yahoo.com>
>To: <ccielab@groupstudy.com>
>Sent: Wednesday, March 09, 2005 9:57 PM
>Subject: Transparently redistribute metric
>
>
>
>
>>r2(config-router)#redistribute eigrp 304 me
>>r2(config-router)#redistribute eigrp 304 metric ?
>> <0-16> Default metric
>> transparent Transparently redistribute metric
>>
>>The transparent keyword on the above instance , what does it do? i try to find the command on the DOC CD but could not locate it <its not even under the redistribute subcommands> , what does this transparently redistributed metric is? how does it differ from the other RIP metric?
>>Any good reference would be appreciated.
>>
>>TIA
>>Hashiru
>>
>>__________________________________________________
>>Do You Yahoo!?
>>Tired of spam? Yahoo! Mail has the best spam protection around
>>http://mail.yahoo.com
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 03 2005 - 17:56:44 GMT-3