From: Jelle Borsje (borsjej@yahoo.dk)
Date: Fri Apr 08 2005 - 05:26:14 GMT-3
Hi,
It seems the command was introduced with the following
bug: CSCdy77097. Along with some other new commands, I
find this:
---- start ----
Additionally, the new subinterface command has been
added:
int e1
ip rip advertise [interval]
where "interval" is the periodic advertisement
interval for rip updates
on the specific interface.
---- end ----
Greetz
Jelle
--- Jim Nguyen <nhatquang@thiennam.org> skrev:
> hi, finally it works with a dialer-group
> added...really strange behaviour!
> Does snapshot routing really need dialer-list to
> work properly?
>
> *Mar 1 00:24:37.417: RIP-TIMER: sending timer on
> BRI0/0 expired
> *Mar 1 00:24:37.417: RIP: sending v2 update to
> 224.0.0.9 via BRI0/0
> (132.1.45.4)
> *Mar 1 00:24:37.417: RIP: build update entries
> *Mar 1 00:24:37.417: 132.1.4.0/24 via 0.0.0.0,
> metric 1, tag 0
> *Mar 1 00:24:37.417: RIP: Update contains 1 routes
> *Mar 1 00:24:37.417: RIP: Update queued
> *Mar 1 00:24:37.417: RIP: Update sent via BRI0/0
> *Mar 1 00:24:37.417: IP: s=132.1.45.4 (local),
> d=224.0.0.9 (BRI0/0), len 52,
> sending broad/multicast
> *Mar 1 00:24:37.421: BR0/0 DDR: ip (s=132.1.45.4,
> d=224.0.0.9), 52 bytes,
> outgoing uninteresting (no dialer-group defined)
> *Mar 1 00:24:37.421: DDR: 45C00034 00000000
> 021126EB 84012D04 E0000009
> 02080208
> *Mar 1 00:24:37.425: DDR: 0020E187 02020000
> 00020000 84010400 FFFFFF00
> 00000000
> *Mar 1 00:24:37.429: BR0/0 DDR: sending broadcast
> to ip 132.1.45.5 -- failed,
> not connected
> *Mar 1 00:24:37.429: BR0/0 DDR: sending broadcast
> to default destination --
> failed, not connected
> *Mar 1 00:24:37.429: IP: s=132.1.45.4 (local),
> d=224.0.0.9 (BRI0/0), len 52,
> encapsulation failed
>
>
> here, I added a dialer-list with some other kinds of
> interesting traffic ( not
> ripv2 224.0.0.9 ) and put it to the bri on r4.
>
>
> interface BRI0/0
> ip address 132.1.45.4 255.255.255.0
> ip rip advertise 3
> encapsulation ppp
> dialer map snapshot 12 name r5 broadcast 2221
> dialer map ip 132.1.45.5 name r5 broadcast 2221
> dialer-group 1
> isdn switch-type basic-net3
> snapshot client 5 30 dialer
> !
> router rip
> version 2
> timers basic 3 18 18 24
> network 132.1.0.0
> no auto-summary
> !
> access-list 100 permit ospf any any ' just
> something other than Ripv2
> access-list 100 permit icmp any any
> dialer-list 1 protocol ip list 100
>
>
>
>
>
> ----- Original Message -----
> From: ccie2be
> To: 'SIMON HART' ; 'Jim Nguyen' ;
> ccielab@groupstudy.com
> Sent: Thursday, April 07, 2005 7:19 PM
> Subject: RE: Legacy Snapshot Routing
>
>
> Hi guys,
>
> Where did that command, ip rip advertise 3, under
> each bri interface come
> from?
>
> I looked it up in the master command index (ios
> 12.2) but it wasn't there.
>
> Any ideas?
>
> TIA, Tim
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> SIMON HART
> Sent: Thursday, April 07, 2005 7:42 AM
> To: Jim Nguyen; ccielab@groupstudy.com
> Subject: Re: Legacy Snapshot Routing
>
> Jim,
>
> The config looks okay to me. Can you post a copy
> of any relevant debugs
> (packet, dialer etc.)
>
> Simon
>
> Jim Nguyen <nhatquang@thiennam.org> wrote:
> Hi group,
>
> I work with legacy snapshot routing, but it
> doesn't work. R4 doesn't call
> R5
> when the quite period timeouts.
> Fom the debug, encapsulation failed, it seems that
> the dialer map snapshot
> won't take affect and R4 cannot make a connection
> to R5.
> Do I miss something here? I will appreciate any
> feedback.
>
> Jim
>
> R4
> !
> interface BRI0/0
> ip address 132.1.45.4 255.255.255.0
> ip rip advertise 3
> encapsulation ppp
> dialer idle-timeout 0
> dialer map snapshot 1 name r5 broadcast 2221
> dialer map ip 132.1.45.5 name r5 broadcast 2221
> isdn switch-type basic-net3
> snapshot client 5 8 dialer
>
> router rip
> version 2
> timers basic 3 18 18 24
> network 132.1.0.0
> no auto-summary
>
> R5
>
> interface BRI0/0
> ip address 132.1.45.5 255.255.255.0
> ip rip advertise 3
> encapsulation ppp
> dialer idle-timeout 20
> dialer map ip 132.1.45.4 name r4 broadcast 4441
> dialer-group 1
> isdn switch-type basic-net3
> snapshot server 5
> !
> router rip
> version 2
> timers basic 3 18 18 24
> network 132.1.0.0
> no auto-summary
>
>
>
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:55 GMT-3