From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Tue Apr 12 2005 - 11:31:34 GMT-3
Dave,
This is on load, not per packet.
It could have taken 50 packets to push it up to the configured load, or only
30, depending on what type of packets are going across the link.
HTH
Lee.
-----Original Message-----
From: DaveW [mailto:kapsi1911@hotmail.com]
Sent: 12 April 2005 15:16
To: Scott Morris; ccielab@groupstudy.com
Subject: Re: ppp multilink w/ dialer load-threshold vs. multilink
load-threshold
Scott,
"If you want to do L3 load balancing, then you'll run dialer load-threshold
WITHOUT running multilink."
So, configuring "dialer load-threshold" without "ppp multilink" is a method
of layer 3 load balancing over two B channels? Would this be per-packet load
balancing?
TIA,
DAve
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'John Matus'" <john_matus@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, April 11, 2005 7:37 PM
Subject: RE: ppp multilink w/ dialer load-threshold vs. multilink
load-threshold
> Personal preference in many instances.
>
> Dialer-load will work regardless of whether you're running PPP multilink.
> Multilink load-threshold will ONLY work if you have a multilink bundle.
>
> So if you're running multilink, the effect is the same. If you want to be
> sure that you bring up a second channel ONLY if you're running multilink,
> then the second one is better.
>
> If you want to do L3 load balancing, then you'll run dialer load-threshold
> WITHOUT running multilink.
>
> HTH,
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John
> Matus
> Sent: Monday, April 11, 2005 7:11 PM
> To: ccielab@groupstudy.com
> Subject: ppp multilink w/ dialer load-threshold vs. multilink
load-threshold
>
> hi folks,
> if you're running ppp multilink with both of the folliwing commands bring
up
> the second b-channel , or is one prefered over the other?
>
> int bri0/0
> encap ppp
> ppp multilink
> ppp multilink load-threshold 128
>
> encap ppp
> ppp multilink
> dialer load-threshold 128
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today - it's FREE!
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:54:56 GMT-3