From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Apr 23 2005 - 13:19:21 GMT-3
Yes, you can use dialer watch on a dialer interface.
The BRI does not use the dialer map to "track" anything. The dialer map
is just used to tell the router where to call when that watched route is
not in the routing table. With a dialer interface, the dialer string is
used.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Matus
Sent: Friday, April 22, 2005 9:48 PM
To: ccielab@groupstudy.com
Subject: dialer watch list on dailer interfaces
i forget, can you use dailer watch on dialer interfaces?? i'm not sure
what
the interface would use to track the like a bri does with the dialer map
ip
statement.
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3