From: boby2kusa (boby2kusa@hotmail.com)
Date: Mon Apr 25 2005 - 13:37:57 GMT-3
Sorry, resending what I meant was the command "aaa authentication dot1x
default group radius" does nto automatically put in the command "dot1x
port-con auto" under the interface, this has to be configured explicitly
under the interface you want the dot1x enabled. And another thing is the
"default" means that the default method list is automatically applied to
all ports, not the dot1x.
----- Original Message -----
From: "Bart Van Kildonck" <bartvankildonck@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Saturday, April 23, 2005 8:01 AM
Subject: Dot1x authentication on Cat3550
> Hi,
>
> I've a question about dot1x on a cat 3550
>
> All the examples I see are always using the default dot1x authentication
group:
>
> aaa authentication dot1x default group radius
> int fas x/x
> dot1x port-con auto
>
> Is it also possible to use a non-default name on a cat3550, or is only
> the default group assigned to the fastethernet interfaces? This way it
> won't be applied to all lines automatically I think and you're not
> locking yourself out.
>
> aaa authentication dot1x ccielab group radius
> int fas x/x
> dot1x port-con auto
>
> rgds,
> bvk
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3