From: san (san.study@gmail.com)
Date: Mon Apr 25 2005 - 16:27:58 GMT-3
Is there a way to change the STP diameter from default 7 to say 3 ? I
came accross this question in one of the practice labs & the answer
was something with changing max-age (15 from default 20) & forward
delay. (17 from default 20)
Can some one pass me a link or explain how to derive it. ?
Searched around Group Study & Goolge could not find. Attached link
shows there is a command called "dia" for cat switches. Not sure for
IOS based switches.
related link:
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a0080094954.shtml
/SAN
On 4/25/05, vazman@aol.com <vazman@aol.com> wrote:
> Set the max age time to 6 sec and forward-time to 5 sec. Total time would be 5+5+6 = 16sec.
>
> S1(config)#spanning-tree vlan 1 max-age ?
> <6-40> maximum number of seconds the information in a BPDU is valid
>
> S1(config)#spanning-tree vlan 1 forward-time ?
> <4-30> number of seconds for the forward delay timer
>
> HTH
>
> -----Original Message-----
> From: micsoniu@telus.net
> To: 'Group Study' <ccielab@groupstudy.com>
> Sent: Mon, 25 Apr 2005 11:35:28 -0700
> Subject: STP Timers
>
> Hi,
>
> How do we set the STP timers so that an access port would move from blocking
> state into the forward state in exactly 16 seconds ?
>
> Thanks.
>
> Narcis
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:08 GMT-3