From: boby2kusa (boby2kusa@hotmail.com)
Date: Wed Apr 27 2005 - 03:55:52 GMT-3
Your question was is there anyway you can configure the dot1x so that you do
not lock your self out of the box and I said there is no way to lock your
self out with a dot1x since the configuration of "authentication dot1x
{default} method1" since that commadn alone does not enable the dot1x on the
port level.
BTW, Though other keywords are visible in the command-line help string, only
the default and group radius keywords are supported. that should be no to
your last question - Can't we assign the aaa group for > dot1x a specific
name so it is not automatically assigned to every line (which is the case
when using the default name). Since only "default" keyword is supported.
----- Original Message -----
From: "Bart Van Kildonck" <bartvankildonck@gmail.com>
To: "boby2kusa" <boby2kusa@hotmail.com>
Cc: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, April 26, 2005 11:14 PM
Subject: Re: Dot1x authentication on Cat3550
> Hi,
>
> Well that's kind of my question. Can't we assign the aaa group for
> dot1x a specific name so it is not automatically assigned to every
> line (which is the case when using the default name).
>
> rgds,
> bvk
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue May 03 2005 - 07:55:09 GMT-3