From: Troy Levin (troylevin@hotmail.com)
Date: Wed May 11 2005 - 16:10:48 GMT-3
I should have researched a little more. I think this lick clears it up.
http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a00800a4754.shtml
----- Original Message -----
From: "Troy Levin" <troylevin@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 11, 2005 3:05 PM
Subject: Queue-Limit and Frame-Relay hold-q
>I have Frame Relay PVC that uses a service-policy inside a map class. I
>want
> to adjust the queue depth so that I can queue more packets before
> dropping.
> How do the to commands frame-relay holdq within the map class and
> queue-limit
> withing the policy map affect the queues?
>
> I can verify that the queue depth changes to the specified value when
> using
> the queue-limit command but not the frame-relay holdq command.
>
> Thanks,
>
> Troy
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:11:57 GMT-3