Re: ipv6 ping and reachability testing

From: gladston@br.ibm.com
Date: Sat May 21 2005 - 15:32:24 GMT-3

• Next message: ccie: "RE: bridging"
• Previous message: mani poopal: "Re: splithorizon on Hub & spoke with eigrp"
• Maybe in reply to: ccie2be: "ipv6 ping and reachability testing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Tim,

You have a 64 prefix pointing to 2001:158:7:1::/64
Your net is 2001:158:7:1

If you ping 2001:158:7:1::0, you are trying to ping a 0 as host part.
Is that what you want?

===================
R 2001:158:7:1::/64 [120/2]
via FE80::9E07:7B01, Tunnel61, 00:17:44/00:02:32
R 2001:254:0:112::/64 [120/2]
via FE80::7A, ATM0/0/0, 00:17:43/00:02:51
R 2001:254:0:113::/64 [120/2]
via FE80::7A, ATM0/0/0, 00:17:43/00:02:51
R 2001:254:0:114::/64 [120/2]
via FE80::7A, ATM0/0/0, 00:17:43/00:02:51
R 2001:254:0:115::/96 [120/2]
via FE80::7A, ATM0/0/0, 00:17:43/00:02:51
R FEC0:0:0:14::/64 [120/2]
via FE80::9E07:7B01, Tunnel61, 00:17:44/00:02:32
R6#
R6#
R6#
R6#
R6#p 2001:158:7:1::0

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:158:7:1::, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
=======================

• Next message: ccie: "RE: bridging"
• Previous message: mani poopal: "Re: splithorizon on Hub & spoke with eigrp"
• Maybe in reply to: ccie2be: "ipv6 ping and reachability testing"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 03 2005 - 10:12:00 GMT-3