From: dusth@comcast.net
Date: Mon Jun 06 2005 - 12:14:40 GMT-3
Minh, you have to use virtual-template interface on all peers since they must all agree on layer-2 protocal which is ppp. hope this help. dustin
-------------- Original message --------------
> Hi,
>
> Sorry for this stupid question. I tested and see that I can't bring the link
> up if I configure only on the hub router.
>
> Minh
>
> ----- Original Message -----
> From: "Hai Minh"
> To:
> Sent: Saturday, June 04, 2005 9:25 AM
> Subject: Frame Relay Configuration in Lab 18 - IEWB
>
>
> > Hi group,
> >
> > In the solution guide, they use Virtual-Template interface on all three
> > routers.
> > In the Lab exam, do we really need to use Virtual-Template interface on
> the
> > two spoke routers? Can we configure directly on the physical interface?
> >
> > TIA
> > Minh@
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3