From: Bob Sinclair (bsinclair@netmasterclass.net)
Date: Thu Jun 09 2005 - 12:32:35 GMT-3
Varthis,
I am pretty sure that the Catalyst 3550 does not support classification on
SVIs, VLANs directly, or Int PortChannels. AFAIK, all policies must be
applied on physical ports. When you do apply a policy outbound, the only
permitted match is on DSCP. Any other match must be applied inbound.
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: Varthis Vassilantonakis
To: Groupstudy
Sent: Thursday, June 09, 2005 10:04 AM
Subject: QoS on 3550. Applying police cir on a Vlan
Hi group,
What if I want to limit some kind of traffic like a specific protocol
(icmp, or ftp for example) for a specific vlan and I want to apply the
configuration on the 3550.
When I tried it on my own lab it is giving me the following :
%QM-4-MATCH_NOT_SUPPORTED: Match type is not supported in classmap (when
I tried to apply it on the vlan)
or
%QM-4-CLASS_NOT_SUPPORTED: Classification is not supported in classmap
(when I tried to apply it on an interface which was an access port for
the specific vlan)
My configuration is like:
class-map test
match access-group 100
!
policy-map test
class test
police cir 64000
!
access-list 100 permit icmp any any
!
int vlan 10
service-policy output test
or
int range fa0/10 - 11
service-policy output test
On both I am getting error messages like the above.
Any ideas on how could I accomplish this?
Thanks in advance.
Best Regards,
Varthis
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3