From: Tom Nooning (t.nooning@insightbb.com)
Date: Fri Jun 10 2005 - 17:27:06 GMT-3
I had the same problem today on a mock lab, running
c2600-j1s3-mz.122-15.T9.bin. I spent a good deal of time debugging and
playing with the underlying routing. About 45 minutes into it I disabled
CEF and there you go. As Richard mentioned, I have also seen CEF do buggy
things, but of course I assumed it was me. Glad I saw it on a mock and not
the real thing though.
Tom
----- Original Message -----
From: "Wang, Ting (Taylor)" <wangting@avaya.com>
To: <ccielab@groupstudy.com>
Sent: Friday, June 10, 2005 12:08 AM
Subject: IP CEF
> Hi All,
> I faced problem for CEF in real lab. After I enabled the CEF on R1, R1
> and other router can't ping SW and R6 even if all the routing table is
> correct. After I disable the CEF, everything is OK. I took me long time
> to figure it out. I can duplicate it in home lab, so I guess it maybe a
> bug. Anyone have any idea?
> SW----R6 S0/0 --- PPPoFR-------s0/0 R1 and others
>
> Thanks ,
> Taylor
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3