From: Henk Botha (henkBotha@hotmail.com)
Date: Wed Jun 15 2005 - 12:56:25 GMT-3
Dave
Have a look at this document.
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example0918
6a0080093f09.shtml
EIGRP uses multicast hello packets to communicate to other EIGRP neighbors.
EIGRP generates the following not on common subnet error message when it
receives an EIGRP hello packet sourced from an IP address on a subnet that
is not configured on its receiving interface:
Henk
----- Original Message -----
From: "Schulz, Dave" <DSchulz@dpsciences.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, June 15, 2005 4:08 PM
Subject: Error messages
> Anyone have any ideas on this one...I am working on a network and am
> getting the following response. I don't have access to a portion of
> this network. I am having a difficult time in locating this on the doc
> CDs.
>
>
> Jun 14 21:32:00.185: IP-EIGRP(Default-IP-Routing-Table:1): Neighbor
> 10.228.0.2 not on common subnet for FastEthernet0/0
>
>
> Jun 14 21:32:00.185: IP-EIGRP(Default-IP-Routing-Table:1): Neighbor
> 10.228.0.4 not on common subnet for FastEthernet0/0
>
> Thanks,
> Dave
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3