From: John Matus (jmatus@pacbell.net)
Date: Thu Jun 16 2005 - 00:51:29 GMT-3
yeah, the solution guide is not finished..........as of today <i checked @
5pm> only labs 1-8 had solutions so i was on my own for 9 and 10. i was
hoping other were doing the same labs and would be able to chime in.
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "Alec" <packtmon@yahoo.com>
To: "John Matus" <jmatus@pacbell.net>; "John Matus"
<john_matus@hotmail.com>; <ccielab@groupstudy.com>
Sent: Wednesday, June 15, 2005 4:53 AM
Subject: Re: IE V2.0 hsrp lab 9
> John,
>
> Why are you posting all these questions to GS?
>
> Doesn't IE provide the correct config's for their
> labs?
>
> Or, don't they have a support forum for this?
>
> I can't believe that IE doesn't have this.
>
> How long have the labs been available?
>
> A
>
> --- John Matus <jmatus@pacbell.net> wrote:
>
>> Regards,
>>
>> John D. Matus
>> MCSE, CCNP
>> Office: 818-782-2061
>> Cell: 818-430-8372
>> jmatus@pacbell.net
>> ----- Original Message -----
>> From: "John Matus" <john_matus@hotmail.com>
>> To: <ccielab@groupstudy.com>
>> Sent: Tuesday, June 14, 2005 5:35 PM
>> Subject: IE V2.0 hsrp
>>
>>
>> > this was a toughy..........
>> >
>> > since you can not use the mac-address command to
>> associate a mac address
>> > w/ the virtual ip address, i first tried the
>> approach of creating a
>> > static arp cache entry for the ip/mac, but that
>> did not show ip in the
>> > "show standby" details....just the default mac
>> address. then i used the
>> > "use-bia" command and i changed the local mac to
>> 0000.0c07.acde, but that
>> > only works if THAT machine is the active standby
>> router. i have no f'ing
>> > clue how else to solve this problem.
>> >
>> > as far as tracking, i was able to create a tracked
>> object to look at route
>> > 112.0.0.0/8, and i was going to use the "ip
>> default-network" command on R1
>> > to point to 156.1.136.254, but it did not show
>> that as the gateway of last
>> > resort, which is what i expected, so i'm a bit
>> perplexed. maybe i was
>> > looking for the wrong results with that command
>> but i'm sure you have to
>> > set the default-gateway on R1 to point to the
>> HSRP address.....
>> >
>> > i did not get to the NATing part of this
>> task....my racktime ran out, but
>> > it looks like a doosy.
>> >
>> >
>>
> _________________________________________________________________
>> > Express yourself instantly with MSN Messenger!
>> Download today - it's FREE!
>> >
>>
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>> >
>> >
>>
> _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Make Yahoo! your home page
> http://www.yahoo.com/r/hs
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:41 GMT-3