From: robbie (robbie@packetized.org)
Date: Mon Jun 27 2005 - 15:16:44 GMT-3
To clarify, are you wanting the router to call you back from the number
you have dialed, or at a predefined 'secure' number based on login?
Or are you simply trying to call in and remotely administer the machine
using the modem, without any callback functionality?
In the latter case, here's a working production config from an 1841.
username test password test
!
line aux 0
login local
modem InOut
transport input all
speed 115200
flowcontrol hardware
!
Cheers,
Robbie
William Walla wrote:
> Good Morning-
>
>
> I am having difficulty with call back on my 1841. I have configured the
> AUX port for login local call back. When I use hyperterm to call the
> modem (USR) attached to the AUX port in my 1841, it ends up showing the
> log in and the banner seems to scroll and it is reading the banner as
> if it is me trying to type in my creditials until the access is locked
> up; where I have to disconnect and try again.
> Does anyone have a successful config of the call back feature set up
> this may that I am trying? Could you post it for me here or email it to
> me?
>
>
> Thanks!
>
>
> My site Remote site
> pc(hyperterm)analog--> USRmodem-->AUXport(1841)
>
>
> wwa...@gmail.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
-- robbie at packetized dot org <short sig army - one line sigs since 1993>
This archive was generated by hypermail 2.1.4 : Wed Jul 06 2005 - 14:43:44 GMT-3