RE: vlan

From: Church, Chuck (cchurch@netcogov.com)
Date: Wed Jul 06 2005 - 16:09:09 GMT-3

Next message: Rajib Khan: "ospf deafult route"
Previous message: Dennis J. Hartmann: "IPv6 Show IP BGP Summary command?"
Maybe in reply to: Rajib Khan: "vlan"
Next in thread: Balaji Siva: "Re: vlan"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

It should work with any VTP mode, as long as the IOS/CatOS supports the
extended VLANs. It may require VTP version 2 or higher as well for them
to propagate, but I'm not positive. You definitely want to check CCO
though, as there are many caveats involving software versions, hardware
support, and span tree protocol types for the support of the extended
VLAN numbers.

Chuck Church
Lead Design Engineer
CCIE #8776, MCNE, MCSE
Netco Government Services - Design & Implementation
1210 N. Parker Rd.
Greenville, SC 29609
Home office: 864-335-9473
Cell: 703-819-3495
cchurch@netcogov.com
PGP key: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D

________________________________

From: Rajib Khan [mailto:rajib56666@yahoo.com]
Sent: Wednesday, July 06, 2005 2:27 PM
To: Church, Chuck; ccielab@groupstudy.com
Subject: RE: vlan

Thanks Chuck,

"spanning-tree extended system-id" did the trick. So basically this can
be done with any vtp mode. Ringht?

Thanks

Raj

"Church, Chuck" <cchurch@netcogov.com> wrote:

        I don't think it has anything to do with VTP. Did you issue the
        extended system ID command:

http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_c
        onfiguration_guide_chapter09186a008007e711.html#wp1032562 Are
you
        running 12.1.13E or higher?


        Chuck Church
        Lead Design Engineer
        CCIE #8776, MCNE, MCSE
        Netco Government Services - Design & Implementation
        1210 N. Parker Rd.
        Greenville, SC 29609
        Home office: 864-335-9473
        Cell: 703-819-3495
        cchurch@netcogov.com
        PGP key:
http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x4371A48D


        -----Original Message-----
        From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
Behalf Of
        Rajib Khan
        Sent: Wednesday, July 06, 2005 8:40 AM
        To: ccielab@groupstudy.com
        Subject: vlan

        Hi Group

        Does any one know how to create a vlan 2000 and above?

        I thought transparent mode will work. But my sw see below only
gives
        option for 1-1005. Not sure whether its IOS issue I am runing
12.1. Any
        idea?



        Native_6k#sh vtp st
        VTP Version : 2
        Configuration Revision : 0
        Maximum VLANs supported locally : 1005
        Number of existing VLANs : 40
        VTP Operating Mode : Transparent
        VTP Domain Name : CISCOVTP
        VTP Pruning Mode : Disabled
        VTP V2 Mode : Enabled
        VTP Traps Generation : Enabled
        MD5 digest : 0x47 0x91 0x55 0x26 0x03 0x86 0x2C
        0xB9
        Configuration last modified by 130.1.17.7 at 5-28-05 10:22:09
        Native_6k#vlan dat
        Native_6k(vlan)#vla
        Native_6k(vlan)#vlan ?
        <1-1005> ISL VLAN index

        Thansk

        Raj


        ---------------------------------
        Discover Yahoo!
        Have fun online with music videos, cool games, IM & more. Check
it out!

Next message: Rajib Khan: "ospf deafult route"
Previous message: Dennis J. Hartmann: "IPv6 Show IP BGP Summary command?"
Maybe in reply to: Rajib Khan: "vlan"
Next in thread: Balaji Siva: "Re: vlan"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:29 GMT-3