From: ccie2be (ccie2be@nyc.rr.com)
Date: Mon Jul 18 2005 - 13:23:57 GMT-3
Hi Nancy,
I'm 99% sure that's not true.
Go ahead and configure both commands. Then do a show fram pvc <dlci> and
see what output you get.
HTH, Tim
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nancy Keating
Sent: Monday, July 18, 2005 12:00 PM
To: ccielab@groupstudy.com
Subject: traffic shaping for one dlci on a physical interface
If I have a physical interface configured for frame
relay with multiple map and dlci's configured and i
want to traffic shape just one dlci, how is this
accomplished?
I thought I would want to use the frame interface-dlci
command with the map command; however IPExpert Section
3 of Version 7.0 says that you cannot use map and
interface-dlci on the same interface.
Thank you
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3