From: John Matus (jmatus@pacbell.net)
Date: Tue Jul 19 2005 - 01:15:14 GMT-3
you can use a class-map and 'match dlci x' or 'match interface dlci x'
Regards,
John D. Matus
MCSE, CCNP
Office: 818-782-2061
Cell: 818-430-8372
jmatus@pacbell.net
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "'Nancy Keating'" <nlk2004@yahoo.com>; <ccielab@groupstudy.com>
Sent: Monday, July 18, 2005 9:23 AM
Subject: RE: traffic shaping for one dlci on a physical interface
> Hi Nancy,
>
> I'm 99% sure that's not true.
>
> Go ahead and configure both commands. Then do a show fram pvc <dlci> and
> see what output you get.
>
> HTH, Tim
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Nancy Keating
> Sent: Monday, July 18, 2005 12:00 PM
> To: ccielab@groupstudy.com
> Subject: traffic shaping for one dlci on a physical interface
>
> If I have a physical interface configured for frame
> relay with multiple map and dlci's configured and i
> want to traffic shape just one dlci, how is this
> accomplished?
>
> I thought I would want to use the frame interface-dlci
> command with the map command; however IPExpert Section
> 3 of Version 7.0 says that you cannot use map and
> interface-dlci on the same interface.
>
> Thank you
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:00:30 GMT-3