cat6500's hardware clock

From: Tom Young (gitsyoung@yahoo.co.jp)
Date: Wed Aug 10 2005 - 10:40:35 GMT-3

Next message: mathew@oztralia.com: "Multicast DM/SM on NBMA hub-and-spoke topology"
Previous message: Rohan Grover \(rohang\): "RE: ipv6 6to4 tunnels"
Next in thread: ashwin kohli: "Re: cat6500's hardware clock"
Maybe reply: ashwin kohli: "Re: cat6500's hardware clock"
Maybe reply: Church, Chuck: "RE: cat6500's hardware clock"
Maybe reply: Balaji Siva: "Re: cat6500's hardware clock"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, group

    I had been heard the catalyst6000 hasn't hardware
clock, if you set the clock and power off/on the switch ,
the system time will be reset.
   But I found the ntp update-calendar command on the
switch, from CCO, it said MSFC will update the hardware
calendar with the NTP time.
  I confused. what the function of that command ?
Dose the cat6500 keeps hardware clock ?

thanks alot

__________________________________
Save the earth
http://pr.mail.yahoo.co.jp/ondanka/

Next message: mathew@oztralia.com: "Multicast DM/SM on NBMA hub-and-spoke topology"
Previous message: Rohan Grover \(rohang\): "RE: ipv6 6to4 tunnels"
Next in thread: ashwin kohli: "Re: cat6500's hardware clock"
Maybe reply: ashwin kohli: "Re: cat6500's hardware clock"
Maybe reply: Church, Chuck: "RE: cat6500's hardware clock"
Maybe reply: Balaji Siva: "Re: cat6500's hardware clock"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3