From: Scott Morris (swm@emanon.com)
Date: Thu Aug 18 2005 - 08:25:44 GMT-3
I should re-phrase that. RIPng doesn't have it, OSPFv3 does. :)
(need caffeine, fingers got ahead of the brain)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rohan Grover (rohang)
Sent: Thursday, August 18, 2005 3:24 AM
To: ccielab@groupstudy.com
Subject: RE: IPv6 Rip Distribute list
I got the problem, hate it when this happens! I send a mail to groupstudy
and 5 mins later I figure out my brain had stopped working.
:-(
The prefix list is wrong. It should be
ipv6 prefix-list ROHAN seq 5 deny 3001:5::/64
ipv6 prefix-list ROHAN seq 10 permit ::/0 le 128
On a related note...since in IPv6 routing protocols are configured directly
under interfaces, the concept of passive interfaces no longer exists right?
So if I want to advertise a loopback ipv6 int in RIPv6, I would configure
'ipv6 router rip <name>' under Loopback and things work great, but then rip
updates will be sent out on L0 going to Null..this is not really desirable
right? Anything to prevent this?
Thanks
Rohan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Rohan Grover (rohang)
Sent: Thursday, August 18, 2005 12:40 PM
To: ccielab@groupstudy.com
Subject: IPv6 Rip Distribute list
Hi,
I have configured IPv6 RIP on 2 routers R1 and R2. I now want to filter a
certain prefix 3001:5::/64 and permit all others on R2.
To do this I created a ipv6 prefix list on R2
ipv6 prefix-list ROHAN seq 5 deny 3001:5::/64
ipv6 prefix-list ROHAN seq 10 permit ::/0
I applied this list to the ipv6 router rip
ipv6 router rip RIPA
distribute-list prefix-list ROHAN in
But I see that only a default route ::/0 sent by R1 is being installed in
the R2 ipv6 routing table. Other prefixes being advertised by R1 like
2001:1::/64, 2001:2::/64 are all being rejected by the filer as per the
debugs
00:35:14: RIPng: Input filter rejects 2001:1::/64
00:35:14: RIPng: Input filter rejects 2001:2::/64
Why is this happening? Is there a different logic to be used for distribute
list filtering for ipv6?
Any help will be much appreciated.
Thanks
Rohan
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:19 GMT-3