From: Mohamed.N (mohamed_n@sifycorp.com)
Date: Tue Aug 30 2005 - 09:55:11 GMT-3
Dear All,
I am not able to understand the concept behind Bc,Be ,CIR,mincir etc.
When i read cisco pages, theoretically iam able to understand what they
are,but practically in commands, i cant understand.
For example, in this command taken from some cisco site,
rate-limit input access-group 102 10000000 1875000 3750000
CIR - traffic is what we purchase from service provoider.So from this
command,it is 10000000.This is clear.The doubt i have is how we decide the
Bc and Be values, which is 1875000 and 3750000.
If anyone can give some links which explain Bc,Be well, then it would be
much helpful.
Regards
Mohamed.
********** DISCLAIMER **********
Information contained and transmitted by this E-MAIL is proprietary to
Sify Limited and is intended for use only by the individual or entity to
which it is addressed, and may contain information that is privileged,
confidential or exempt from disclosure under applicable law. If this is a
forwarded message, the content of this E-MAIL may not have been sent with
the authority of the Company. If you are not the intended recipient, an
agent of the intended recipient or a person responsible for delivering the
information to the named recipient, you are notified that any use,
distribution, transmission, printing, copying or dissemination of this
information in any way or in any manner is strictly prohibited. If you have
received this communication in error, please delete this mail & notify us
immediately at admin@sifycorp.com
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3