From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Wed Aug 31 2005 - 18:18:54 GMT-3
Yes, as the addresses are only locally significant to that specific link
(hence link-local)
Rack2R4#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Rack2R4(config)#int e0/0
Rack2R4(config-if)#ipv6 address fe80::4 link-local
Rack2R4(config-if)#int e0/1
Rack2R4(config-if)#ipv6 address fe80::4 link-local
Rack2R4(config-if)#do sh run | in Ethernet|link-local
interface Ethernet0/0
ipv6 address FE80::4 link-local
interface Ethernet0/1
ipv6 address FE80::4 link-local
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> dusth@comcast.net
> Sent: Wednesday, August 31, 2005 3:59 PM
> To: Scott Morris; 'Graham Hopkins'; ccielab@groupstudy.com
> Subject: RE: IPv6 over Frame Relay
>
> As the name of the address is link local, if I hardcode the serial0/0
as
> fe80::2 link-local, can I still be able to use fe80::2 link-local on
> serial0/1 which connect to different remote router and fe80::2
link-local
> on fa0/0?
>
> Dustin
>
> -------------- Original message --------------
>
> > I do agree with you. I think doing things like this would make life
much
> > simpler.
> >
> > I'm sure people will learn exciting things like this when they go to
> really
> > implement this beast in real live networks! ;)
> >
> > Scott
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > Graham Hopkins
> > Sent: Wednesday, August 31, 2005 2:47 PM
> > To: ccielab@groupstudy.com
> > Subject: IPv6 over Frame Relay
> >
> > Many of the workbooks and examples use the router generated link
local
> > address in frame relay maps
> >
> > frame-relay map ipv6 FE80::204:C1FF:FE8E:19E0 103 broadcast
> >
> > however I see some problems with this both in the real world and the
> lab.
> > This config is router specific so if for exmaple a hub router
changes
> you
> > need to reconfigure all the spoke routers. Or the proctor loads your
> configs
> > onto another rack then your config will not work.
> >
> > Would it not be better to hard code all frame-relay link local
addresses
> to
> > prevent this.
> >
> > ipv6 address FE80::2 link-local
> >
> > comments please
> >
> > Graham Hopkins
> >
> >
This archive was generated by hypermail 2.1.4 : Sun Sep 04 2005 - 17:01:20 GMT-3