SV: Qos question (bandwidth,police).

From: Jens Petter Eikeland (jenseike@start.no)
Date: Sun Sep 11 2005 - 18:28:21 GMT-3

Hi ,

I am sure you will get a better understanding of this two technologies by
reading findings yourselfe

Here is a some good documents covering both technologies very vel

http://www.cisco.com/en/US/tech/tk543/tk545/tech_design_guides_list.html

Answer to your question is to use the policing command and conform it to 100
meg as in your example

Jens Petter

-----Opprinnelig melding-----
Fra: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Pe vegne av Stefan
Grey
Sendt: 11. september 2005 23:02
Til: ccielab@groupstudy.com
Emne: Qos question (bandwidth,police).

It is needed to limit the input of some WEB traffic to 100 Megabyte.

I saw such config in the book:
policy-map LIMIT
class web
bandwidth 100
police 100000 conform-action transmit exceed action drop.

Whe could the bandwidth here be used. Whey to command are used together
here.

As I know police is really limiting traffic to 100 Mb. But bandwidth is for
custom queuing.
Could anybody comment this configuration???? What would be the difference
between this config with or without bandwidth command.

Thanks.

This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3