From: Hai Minh (minhlth@ipmac.com.vn)
Date: Tue Sep 13 2005 - 06:56:04 GMT-3
Hi group,
I have 2 switchs:  Cat2950 and Cat3550 connected via Fa0/10
On my cat2950, i configure port fa0/10 to mode dynamic auto and the other end
with dynamic desirable.  The trunking works fine but when i look at dtp
information, i see something strange:
DTP information for FastEthernet0/10:
  TOS/TAS/TNS:                              TRUNK/DESIRABLE/TRUNK
<---trunking is on
  TOT/TAT/TNT:                              802.1Q/802.1Q/802.1Q
<---encap dot1q
But int the statistics:
2204 native, 2204 software encap isl, 0 isl hardware native  <-----what does
this mean: 2204 packets encap isl ? ---->
we all know that cat2950 does not support isl, so what does this infomation
mean ?
Thanks
-------------------------------------------------
Switch3550#sh run int fa0/10
!
interface FastEthernet0/10
switchport mode dynamic desirable
end
Switch3550#sh dtp int fa0/10
DTP information for FastEthernet0/10:
  TOS/TAS/TNS:                              TRUNK/DESIRABLE/TRUNK
<---trunking is on
  TOT/TAT/TNT:                              802.1Q/802.1Q/802.1Q
<---encap dot1q
  Neighbor address 1:                       000C85A5700A
  Neighbor address 2:                       000000000000
  Hello timer expiration (sec/state):       9/RUNNING
  Access timer expiration (sec/state):      279/RUNNING
  Negotiation timer expiration (sec/state): never/STOPPED
  Multidrop timer expiration (sec/state):   never/STOPPED
  FSM state:                                S6:TRUNK
  # times multi & trunk                     0
  Enabled:                                  yes
  In STP:                                   no
  Statistics
  ----------
  2200 packets received (3 good)
  2197 packets dropped
      0 nonegotiate, 0 bad version, 2197 domain mismatches,
      0 bad TLVs, 0 bad TAS, 0 bad TAT, 0 bad TOT, 0 other
  4408 packets output (4408 good)
      2204 native, 2204 software encap isl, 0 isl hardware native  <-----what
does this from: 2204 packets encap isl ? ---->
  0 output errors
-----------------------------------------------------
and this is on Cat2950:
Switch2950#sh run int fa0/10
Building configuration...
Current configuration : 69 bytes
!
interface FastEthernet0/10
  switchport mode dynamic auto
end
Switch2950#sh dtp int fa0/10
DTP information for FastEthernet0/10:
  TOS/TAS/TNS:                              TRUNK/AUTO/TRUNK
  TOT/TAT/TNT:                              802.1Q/802.1Q/802.1Q
  Neighbor address 1:                       000DBCA8838A
  Neighbor address 2:                       000000000000
  Hello timer expiration (sec/state):       25/RUNNING
  Access timer expiration (sec/state):      294/RUNNING
  Negotiation timer expiration (sec/state): never/STOPPED
  Multidrop timer expiration (sec/state):   never/STOPPED
  FSM state:                                S6:TRUNK
  # times multi & trunk                     0
  Enabled:                                  yes
  In STP:                                   no
  Statistics
  ----------
  2212 packets received (12 good)
  2200 packets dropped
      0 nonegotiate, 0 bad version, 2200 domain mismatches,
      0 bad TLVs, 0 bad TAS, 0 bad TAT, 0 bad TOT, 0 other
  4408 packets output (4408 good)
      2208 native, 2200 software encap isl, 0 isl hardware native
  0 output errors
  0 trunk timeouts
  4 link ups, last link up on Mon Mar 01 1993, 04:26:15
  3 link downs, last link down on Mon Mar 01 1993, 04:25:43
This archive was generated by hypermail 2.1.4 : Sun Oct 02 2005 - 14:40:14 GMT-3